0408 758 491

Structural steel fabrication for Melbourne factories and warehouses

Columns, beams, frames and the steel for precast panels, fabricated at our Campbellfield workshop and installed with our own crane truck.

Grey steel posts and beams run along the front of a three-storey building, supporting cantilevered steel-framed upper rooms against a cloudy sky.

DFV Engineering fabricates and installs structural steel for factories, warehouses and other industrial and commercial buildings across Melbourne's north. We work from the engineer's drawings, build the steel in our own workshop at 48 Bancell Street, Campbellfield, and deliver and install it with our own crane truck.

On precast jobs we supply the cast-in plates before the panels are poured, fit the stitch plates when the panels go up, then install the structure that sits on them.

Structural steel is the work we do most. Most of it comes from builders who have used us for years, and they get the same crew on every job.

Structural steel we fabricate and install

  • Columns and beams

    Universal beams and columns, channels and box section, cut, drilled and welded to the drawings.

  • Frames for factories and warehouses

    The structural frame of the building, fabricated in sections that fit on the truck and bolt together on site.

  • Precast connections

    Cast-in plates before the panels are poured, stitch plates when they go up, and the structure that sits on them.

  • Mezzanine floors and platforms

    Steel floors, stairs and handrails inside existing buildings.

  • Finishes

    Painted, or hot-dip galvanised for steel that lives outside or near the ground.

  • Installation

    Delivered and installed on our own crane truck, so the steel and the install come from one business.

How a job runs

  1. Send drawings or a photo

    Email or text them to David. A phone photo of the drawing or the site is enough to start.

  2. Quote by the tonne

    Priced on the weight of steel in the job, the fabrication, the finish and the install.

  3. Fabricated at Bancell Street

    Cut, welded, drilled and machined in the one workshop, under the gantry crane, by the same crew every time.

  4. Delivered and installed

    On our own crane truck, when your site is ready for it.

Common questions

Anything else, call David on 0408 758 491. He quotes the jobs himself.

Do you install the steel as well as fabricate it?

Yes. We fabricate it at our workshop in Campbellfield and install it on site, delivered on our own crane truck, so one business is responsible from the drawing to the last bolt.

What do you need to quote a structural steel job?

The engineer's drawings, the site address and when you need the steel on site. Email them to david@dfvengineering.com or send them through the form. A photo of the drawing is enough to start.

How much does structural steel fabrication cost?

It depends on the weight of steel in the job, plus fabrication, the finish and installation. David works out the steel from the drawings and checks current prices with the supplier, so the quote reflects what steel costs this month.

Do you supply cast-in plates and stitch plates for precast panels?

Yes. Cast-in plates before the panels are poured, stitch plates when the panels go up, and the structure that sits on them.

What areas do you cover?

Campbellfield and Melbourne's northern suburbs, and out to Bacchus Marsh and Dandenong for the right job.

The DFV workshop at 48 Bancell Street, seen from the yard

Call David, or send the job through

Send the drawings or a photo and David will call you back. For anything urgent, ring.

Call David direct0408 758 491
Workshop48 Bancell Street
Campbellfield VIC 3061
Get directions
Workshop phone(03) 9357 2890
HoursMon to Fri, 7 am to 3:30 pm
Where we workCampbellfield and Melbourne's northern suburbs, and out to Bacchus Marsh and Dandenong for the right job.

Send the job through

Drawings or photosPDF, DWG or phone photos. Up to 10 files, 10 MB in total.

We use your details only to quote this job and call you back. Privacy