0408 758 491
The DFV workshop with the crane truck loaded under the 6.3 tonne gantry crane

Steel fabrication, machining and heavy repairs. Under one roof in Campbellfield.

Fabricated at Bancell Street, delivered and installed with our own crane truck. Factories, mezzanines, house steel, and the trucks and plant that carry it, across Melbourne's north. Call David direct.

  • Trading since2003
  • The same crew for24 years
  • Gantry crane6.3 tonne
  • Truck pit7 metres
  • Press brake170 tonne
  • Delivery and installOwn crane truck

What we do

A general engineering and steel fabrication workshop in Melbourne's north. If it is steel, we cut it, weld it, machine it, fit it or fix it, and most of it never leaves our building until it is ready to go on the truck.

  • Structural steel for factories and warehouses

    Columns, beams and frames for factories and warehouses, fabricated here and installed on site. Cast-in and stitch plates for precast panels, then the structure that goes on them.

    Get a structural quote
    A long black steel canopy on steel columns along the footpath of a new commercial building
  • Mezzanine floors

    Steel mezzanine floors for factories and warehouses, with the stairs and handrails, fabricated here and installed by our own crew.

    Price a mezzanine
    A steel mezzanine floor on grey steel columns in a warehouse, with a steel stair and handrails up to it
  • Residential steel

    Beams, posts, lintels and frames for houses and extensions, made to the engineer's drawings and delivered when the builder needs them.

    Send us the drawings
    A steel beam and post frame installed inside the brick walls of a house
  • Steel stairs, balustrades and gates

    Steel stairs, handrails, balustrades, fences and gates for warehouses, mezzanines and houses, made in our own workshop.

    Ask about stairs or gates
    A dark grey steel stair with checker plate treads rising to a warehouse mezzanine
  • Machine shop and sheet metal

    Turning, milling and drilling for one-off parts and repairs, and a sheet metal department with its own press brake for guards, brackets, trays and covers.

    Ask about a part
    A steel sleeve spinning in a lathe chuck as a boring bar finishes its inside face, with swarf piled on the bed below.
  • Concrete plant and trailer maintenance

    Repairs and maintenance on concrete batching plants and the semi-trailers that serve them.

    Book a maintenance call
    A tandem trailer painted red, with a mesh deck, a toolbox and a drum holder, in the workshop
  • Commercial and residential property maintenance

    Repairs and maintenance for shopping strips, offices and other commercial properties, and homes too: leaks, ceilings and sheeting, doors, walls, graffiti and steelwork.

    Send us the list
    A stainless steel flue running up a rendered house wall and above the roofline
  • Truck chassis and mechanical repairs

    A 7 metre underground pit for working under trucks. Cracked chassis rebuilt and engineered, diffs removed and rebuilt, diesel motors rebuilt.

    Talk to us about a truck
    A red and white truck stripped back to its chassis rails and drive axles in the workshop

Our work

Photos from our jobs and the workshop. No stock pictures.

A steel sleeve spinning in a lathe chuck as a boring bar finishes its inside face, with swarf piled on the bed below.
Boring a sleeve on the lathe
A large steel sheet being folded on our press brake, with the crane truck's hook holding the sheet up.
Folding a large sheet on the press brake
A white crane truck lifts a galvanised steel wall frame above a three-storey steel-framed townhouse block while a man watches from the ground.
Our crane truck lifting frames onto townhouses
A steel roof frame of black beams and galvanised purlins against a blue sky, over a slab surrounded by timber wall frames.
Steel roof framing for a house extension
A welder in a face shield oxy-cutting the old grid out of a large excavator bucket on a stand, sparks falling, overhead gantry crane above.
Rebuilding an excavator sieve bucket
A finished steel mezzanine in a warehouse, with an office built on top and a cool room underneath
A steel mezzanine in a warehouse

See more of our work

How a job runs

Most of our work comes from builders who have used us for years. This is what they expect, and what a first-time customer gets too.

  1. Send drawings or a photo

    Email or text them to David. A phone photo of the drawing or the site is enough to start.

  2. Quote by the tonne

    Priced on the weight of steel in the job, the fabrication, the finish and the install.

  3. Fabricated at Bancell Street

    Cut, welded, drilled and machined in the one workshop, under the gantry crane, by the same crew every time.

  4. Delivered and installed

    On our own crane truck, when your site is ready for it.

Run by a toolmaker, not a salesman.

David trained as a fitter and turner and a toolmaker, and earlier in his career built six- and seven-axis machines and robotics. He has run DFV Engineering in Campbellfield since 2003 with the same core crew, three people who have worked together for 24 years.

It is a small shop on purpose. David quotes the job, David is on the tools, and David answers the phone.

I've never lost a customer in my life. Some have been with me since 2006.

David, owner
Where we workCampbellfield and Melbourne's northern suburbs, and out to Bacchus Marsh and Dandenong for the right job.
More about DFV
The DFV Engineering workshop with the 6.3 tonne gantry crane overhead

Common questions

Anything else, call David on 0408 758 491. He quotes the jobs himself.

What does DFV Engineering do?

DFV Engineering is a general engineering and steel fabrication workshop in Campbellfield, Melbourne. We fabricate and install structural steel for factories, mezzanine floors and houses, run a machine shop and a sheet metal department with a press brake for folding, repair truck chassis, maintain concrete plants, trailers and commercial properties, and hire out our crane truck.

Where is DFV Engineering?

At 48 Bancell Street, Campbellfield VIC 3061, in Melbourne's north. We work across the northern suburbs, into the Melbourne CBD for property maintenance, and out to Bacchus Marsh and Dandenong for the right job.

How do I get a quote?

Call David on 0408 758 491, email the drawings to david@dfvengineering.com, or send them through the form below. A photo of the drawing or the site is enough to start.

How long has DFV Engineering been going?

DFV Engineering has traded in Campbellfield since 2003, and the core crew has worked together for 24 years.

The DFV workshop at 48 Bancell Street, seen from the yard

Call David, or send the job through

Send the drawings or a photo and David will call you back. For anything urgent, ring.

Call David direct0408 758 491
Workshop48 Bancell Street
Campbellfield VIC 3061
Get directions
Workshop phone(03) 9357 2890
HoursMon to Fri, 7 am to 3:30 pm
Where we workCampbellfield and Melbourne's northern suburbs, and out to Bacchus Marsh and Dandenong for the right job.

Send the job through

Drawings or photosPDF, DWG or phone photos. Up to 10 files, 10 MB in total.

We use your details only to quote this job and call you back. Privacy