0408 758 491

Steel stairs, balustrades and gates in Melbourne's north

Stairs, handrails, balustrades, fences and gates, made at our Campbellfield workshop for factories, warehouses, mezzanine floors and houses.

Black steel platform with mesh guard rails and a straight steel stair, standing in a workshop doorway.

DFV Engineering makes steel stairs, handrails, balustrades, fences and gates at our workshop at 48 Bancell Street, Campbellfield, for factories, warehouses and houses across Melbourne's north.

Stairs for a mezzanine are made in the same workshop as the floor and installed by our own crew, so the whole job comes from one place. For houses and extensions we make stairs, balustrades and side gates, as well as the steel beams and posts.

Stairs, balustrades and gates we make

  • Mezzanine and platform stairs

    Steel stairs up to mezzanine floors and platforms, fabricated to suit the space.

  • Stairs for houses

    Steel stair flights for houses and extensions, made in the workshop and delivered to site.

  • Handrails and balustrades

    Around open floor edges and down the stairs, in factories, warehouses and houses.

  • Fences and gates

    Steel fences and gates, including side gates, made in our workshop and fitted on site.

  • Finishes

    Painted, or hot-dip galvanised for steel that lives outside or near the ground.

  • Repairs

    Handrails, stairs and gates repaired as part of our property maintenance work.

How a job runs

  1. Send drawings or a photo

    Email or text them to David. A phone photo of the drawing or the site is enough to start.

  2. Quote by the tonne

    Priced on the weight of steel in the job, the fabrication, the finish and the install.

  3. Fabricated at Bancell Street

    Cut, welded, drilled and machined in the one workshop, under the gantry crane, by the same crew every time.

  4. Delivered and installed

    On our own crane truck, when your site is ready for it.

Common questions

Anything else, call David on 0408 758 491. He quotes the jobs himself.

Do you make stairs for mezzanine floors?

Yes. Stairs, handrails and gates for a mezzanine are fabricated in our workshop with the floor itself and installed by our own crew.

Do you make steel stairs and gates for houses?

Yes. We make steel stairs, balustrades and side gates for houses and extensions. Send the drawings or a photo and the address, and David will call you.

Are your stairs and gates painted or galvanised?

Either. They can be painted, or hot-dip galvanised for steel that lives outside or near the ground. Tell David where it's going when you ask for a quote.

What do you need to quote stairs or a gate?

Drawings if you have them. If not, a photo of the space, the measurements you have, and the site address.

What areas do you cover?

Campbellfield and Melbourne's northern suburbs, and out to Bacchus Marsh and Dandenong for the right job.

The DFV workshop at 48 Bancell Street, seen from the yard

Call David, or send the job through

Send the drawings or a photo and David will call you back. For anything urgent, ring.

Call David direct0408 758 491
Workshop48 Bancell Street
Campbellfield VIC 3061
Get directions
Workshop phone(03) 9357 2890
HoursMon to Fri, 7 am to 3:30 pm
Where we workCampbellfield and Melbourne's northern suburbs, and out to Bacchus Marsh and Dandenong for the right job.

Send the job through

Drawings or photosPDF, DWG or phone photos. Up to 10 files, 10 MB in total.

We use your details only to quote this job and call you back. Privacy