0408 758 491

Steel beams, posts and lintels for houses and extensions

Residential steel made to the engineer's drawings at our Campbellfield workshop, delivered when the builder needs it and lifted into place.

A steel roof frame of black beams and galvanised purlins against a blue sky, over a slab surrounded by timber wall frames.

DFV Engineering fabricates and installs residential structural steel across Melbourne's north: beams, posts, lintels and frames for new houses, extensions and renovations. We work from the engineer's drawings, fabricate everything at 48 Bancell Street, Campbellfield, and deliver and install it to suit the builder's program.

Each member on the drawing is measured off the plan and fabricated to match, so it goes straight into place on site. Most of our house work comes from builders, but homeowners and owner-builders are welcome to call.

Residential steel we fabricate and install

  • Steel beams

    Universal beams and channels for floors, roofs and wide openings, cut and drilled to the drawings.

  • Steel posts and columns

    Box-section and column posts with base and cap plates, ready to fix.

  • Steel lintels

    Lintels for windows, doors and garage openings, made to the sizes on the plan.

  • Renovations and extensions

    Steel into existing brick and timber houses, where it has to fit what is already there.

  • Stairs, balustrades and gates

    Steel stairs, balustrades, fences and gates, made in the same workshop.

  • Delivery and install

    Delivered on our truck and lifted into place, timed to the builder's program.

How a job runs

  1. Send drawings or a photo

    Email or text them to David. A phone photo of the drawing or the site is enough to start.

  2. Quote by the tonne

    Priced on the weight of steel in the job, the fabrication, the finish and the install.

  3. Fabricated at Bancell Street

    Cut, welded, drilled and machined in the one workshop, under the gantry crane, by the same crew every time.

  4. Delivered and installed

    On our own crane truck, when your site is ready for it.

Common questions

Anything else, call David on 0408 758 491. He quotes the jobs himself.

Can you work from my engineer's drawings?

Yes, that's how every house job starts. Each beam, post and lintel on the drawing (FB1, L3, C1 and so on) is measured off the plan and fabricated to match.

Do you install it, or only fabricate it?

We fabricate and install. If your builder would rather put it in themselves, talk to David about fabrication and delivery only.

How do you price house steel?

By the weight of steel in the job, plus fabrication, the finish and installation. Send the drawings and the address for a quote.

Do you work with homeowners, or only builders?

Both. Most of our house work comes through builders, but if you're renovating or building yourself, send the engineer's drawings and the address and David will call you.

The DFV workshop at 48 Bancell Street, seen from the yard

Call David, or send the job through

Send the drawings or a photo and David will call you back. For anything urgent, ring.

Call David direct0408 758 491
Workshop48 Bancell Street
Campbellfield VIC 3061
Get directions
Workshop phone(03) 9357 2890
HoursMon to Fri, 7 am to 3:30 pm
Where we workCampbellfield and Melbourne's northern suburbs, and out to Bacchus Marsh and Dandenong for the right job.

Send the job through

Drawings or photosPDF, DWG or phone photos. Up to 10 files, 10 MB in total.

We use your details only to quote this job and call you back. Privacy