Machine shop and sheet metal fabrication in Campbellfield
Turning, milling and drilling for one-off parts and repairs, and a sheet metal department with a 170 tonne press brake for guards, brackets, trays and covers.

DFV Engineering runs a machine shop and a sheet metal department at our workshop at 48 Bancell Street, Campbellfield, in Melbourne's north. We make one-off parts, replacement parts and repairs for factories, plant operators and other trades, as well as the parts our own steel and truck work needs.
David is a fitter and turner and a toolmaker who built six- and seven-axis machines before he ran this shop, so the machining is done by someone who knows how machines are made, not just how to run them.
Machining and sheet metal fabrication
Turning
Shafts, pins, bushes and round parts, one-off or in small runs.
Milling and drilling
Flat and shaped parts, slots, keyways and accurate hole patterns.
Sheet metal
Guards, brackets, trays and covers, made in our sheet metal department.
Folding
Sheet and plate folded on our 170 tonne press brake, up to 3.2 metres long, from small brackets to large sheets, with the crane truck to carry the big ones.
Welding and oxy cutting
Fabrication and repairs in steel, from light brackets to heavy plate.
Repairs and replacement parts
Made to a drawing, or measured from the worn or broken part.
Parts for our own jobs
The same shop makes the parts for our structural, truck and plant work, so nothing waits on an outside supplier.
How a job runs
Bring in the part or drawing
Drop it at 48 Bancell Street, or email a drawing or photos to David.
Quote
David looks at what's needed and prices the job.
Made in house
Machined, cut or welded in our own workshop.
Ready to collect
Picked up from the workshop, or delivered with your other steel.
Common questions
Anything else, call David on 0408 758 491. He quotes the jobs himself.
Can you make a part from a sample?
Yes. Bring in the worn or broken part, or a drawing, and we'll measure it and make a new one.
Do you take one-off jobs?
Yes. Most machining work is one-offs and small runs: a single replacement part, a repair or a short batch.
What sheet metal work do you do?
Guards, brackets, trays and covers, cut and folded on our press brake in our sheet metal department, for machines, plant and trucks.
Where are you, and when are you open?
48 Bancell Street, Campbellfield VIC 3061. Monday to Friday 7 am to 3:30 pm, closed weekends.
Related work

Call David, or send the job through
Send the drawings or a photo and David will call you back. For anything urgent, ring.
Call David direct0408 758 491Campbellfield VIC 3061
Get directions








